MF1 chip Card Block Encrypt Read/Write Module,ISO14443 TypeA
This module series carries has on the complex ISO14443 TypeA protocol as well as the read-write card operation the encapsulation, all the card read and write operations into several simple instructions. Users don't need to understand complex ISO14443 TypeA protocol,only need to know the use of card structure, can be operated by simple instructions to read the module, the complicated operation process all by the module to the internal MCU to complete.
The products are widely used in non-contact smart water, electricity, gas meter, electronic induction door lock, transportation IC card read and write device, desktop card machine, access control attendance, reading and writing device, auto electronic induction lock, office/mall/bath center locker safety control, various anti-counterfeiting system and production process control.
Product features
Module is simple and easy to use, cost-effective;
Using high integration chip card reader;
Support MF1 IC S50/S70, FM1208 and compatible series of contactless smart card;
Read/write distance long (according to the application of up to 50-80mm);
According to the need, can choose SPI, I2C, UART, RS232 and RS485 or Wiegand interface to connect with any MCU;
When using UART interface, with automatic baud rate detection function, when with 232 level transformation can be directly connected to the computer;
Choose 5V power supply, low power consumption;
With the control line and controllable buzzer signal output, can choose onboard LED and buzzer;
Can read and write module block in EEPROM, with password loading function;
Support card automatic detection function, without PC frequently send card search instructions;
Provide C51 function library for secondary development;
Small size (antenna integration module 30×80×7mm).
Main technical parameters | Operating frequency | 13.56MHz |
| Support card | MF1 IC S50/S70, FM1208 and its compatible smart card |
| Support Protocol | ISO 14443 TypeA |
| Read range | 30-80mm (different depending on antenna, antenna integration reader distance of about 6.5cm) |
| Card transfer rate | 848kbit/s |
| Interface | UART,I2C,RS232,Wiegand,RS485,custom SPI |
| Power Supply | +5V for antenna integration |
| Average current | 70mA/DC5V |
| Production Process | use of surface mount technology |
| Storage temperature | -40℃~+85℃ |
| Operating temperature | -30℃~+70℃ |
| Size | Split 30×80×7mm |
| Antenna integration 30×50×7mm 30×34.35×2.5mm |
| Pin spacing | 2.0mm |
| Weight | 20g |
